Jaw Crusher

jaw-crusher
Structure
Jaw crusher mainly consists of frame (chassis), the eccentric shaft, pulley composition, jaw, connecting rod, the adjustment mechanism with the latch spring and other components.
Use
Jaw Crusher Jaw Crusher (also known as the tiger population) occurred in 1858, the first widely used in road construction, later used in mining. This series crusher is mainly used in metallurgy, mining, chemical, cement, construction, refractory and ceramics and other industrial sectors for secondary and tertiary crushing of various ores and rocks with medium hard. Scope
The series crusher most suitable crushing compression strength not higher than 300MPa (MPa) of a variety of soft and hard ore, the largest block of the material to be broken is not greater than the technical parameters specified in the table.
Working Principle
This series crusher song moving extrusion type, its working principle is: the motor drive power transmitted to the V-belt pulley, the pulley driven eccentric shaft to move jaw (jaw movable jaw plate surface mounted – the jaws collectively a movable jaw) around the upper portion of the eccentric shaft movable jaw movement caused the whole movement up and down, when moving the movable jaw rises between toggle plate and moving jaw angle between large, thus promoting the moving jaw plate close to the fixed jaw plate, simultaneously with the material being crushed or split pieces (cut pieces), to achieve the purpose of crushing; when moving jaw down, the angle between toggle plate and moving jaw smaller, movable jaw plate under the lever action, spring, away from the fixed jaw plate, this time the crushed material discharged from the crushing chamber mouth. With the continuous rotation of motor broken motor jaw for periodic motion crushing and waste material, to achieve mass production.
Feature
Broken jaw crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, low operating costs jaw crusher working principle: broken song moving extrusion type, work, driven by the motor pulley eccentric shaft rotates, so that the movable jaw cycle to close, leaving the fixed jaw, thereby materials are extrusion, rub, grind, such as multiple broken, so that the material into small, gradually whereabouts until discharged from the discharge port. with the continuous rotation of motor broken motor jaw make periodic crushing and nesting to achieve mass production.

Technical Parameter:

Model Feeder Opening Size (mm) Feeding Size(mm) Discharging Opening Size (mm) Capacity (t/h) Power (kw) Overall Dimension L×W×H (mm)
PE150×250 150×250 ≤130 15-45 1-4 5.5 896×745×935
PE250×300 250×300 ≤150 15-55 3-6 7.5 1050×987×1000
PE250×400 250×400 ≤210 25-60 5-20 15 1215×1520×1030
PE400×600 400×600 ≤350 40-90 15-60 30 1650×1588×1050
PE500×750 500×750 ≤425 50-100 40-110 45 1956×1918×1920
PE600×900 600×900 ≤500 60-125 90-180 55 2250×1733×2280
PE800×900 800×900 ≤600 80-140 100-220 75 2450×2950×2490
PE750×1060 750×1060 ≤630 60-150 110-380 110 2531×2455×2783
PE900×1060 900×1060 ≤700 100-160 180-380 110 2900×2657×2950
PE900×1200 900×1200 ≤750 110-165 220-450 110-132 3100×2760×3260
PE1200×1500 1200×1500 ≤950 115-195 250-500 180-220 3710×3446×4075
PE1500×1800 1500×1800 ≤1200 135-225 350-700 280 5100×4700×4300
PEX150×750 150×750 ≤120 10-40 5-16 15 1310×1118×1145
PEX250×750 250×750 ≤210 15-50 15-30 22-30 1400×1751×1515
PEX350×750 350×750 ≤300 15-50 18-40 30 1485×1680×1648
PEX250×1000 250×1000 ≤210 15-60 15-60 30 1550×1964×1380
PEX250×1200 250×1200 ≤210 15-60 20-60 37-45 1530×1946×1380
PEX300×1300 300×1300 ≤250 25-60 10-65 55-75 2000×2320×1730

Previous: None       Next: